VALVE TYPE: On-Off Valves

Side Entry

MAIN FEATURES:

  • Two or three pieces body construction; bolted joints
  • Through conduit, full bore, negligible pressure drop, no turbulence, suitable for pigging operations
  • Reduced port on request
  • Both Soft Seated or Metal Seated construction available
  • Double block and Bleed
  • Self Relieving and/or Double Piston Seats options available
  • Large variety of seat and stem seals selection, including Infinity© metal stem seal ( PetrolValves patent pending)
  • Specific design for HIPPS, HOPPS, ESD, SSIV application
  • Special constructions available for High and Low Temperature (Cryogenic), erosive /abrasive, corrosive service
  • Extremely wide selection of materials for both body and internals, including: carbon steel, low alloy steels, stainless steels, Duplex 22/25 Cr, Ni-alloys and titanium
  • Hardfacing/Coating: ENP, Stellite, any Tungsten and Chromium Carbide, Ceramic
  • Design available for sizes up to 60” and pressure classes including ANSI 4500 and API 15000 psi. Larger sizes available upon request.